6.5hp 2:1 reduction petrol engine

$189
Condition: New
Type: Buy
Payment: Cash, Bank Deposit, PayPal, Others
Location: Christchurch
Ends On: 01:00 PM, 24 Dec 2025
Category: Tools & Home Improvement
Shipping: Pick Up, Christchurch ($9.90), South Island ($22.00), North Island ($24.90), Rural ($26.90) Share: Share on Facebook Share on Twitter Share on Reddit Share via Email

 Report this page

Posted By:

GreatRange

0% Positive (0)

From Great Range Products
Engines & motors
Honda Replacement
12 Months Warranty

NOTE: We have been selling the motor for over 4 years now with little to no issues.

New 6.5HP 196cc 4 Stroke Petrol Power Engine With a 2:1 Reduction Gearbox (Fitted) 3.6L
Reduces the motor speed by half for the require a slower than normal speed.

Grab this great Gasoline Engine with it's powerful 6.5 HP 196cc engine.
The 4-stroke single-cylinder engine features a fuel tank capacity of 3.6L.
The 37cm by 31.5cm engine with a height of 33cm has the ability to reach massive power output of 2.5KW and a max torque of 10.8N @ 2500rpm.
Ideal for Log Splitters, Water Blasters, Plate Compactors, Concrete vibrator, Go karts Rotary hoe.

FEATURES

* 2:1 REDUCTION GEARBOX THAT EFFECTIVELY REDUCES THE MOTOR SPEED BY HALF FOR USES THAT REQUIRE A SLOWER THAN NORMAL SPEED
* WITH 20MM KEYED HORIZONTAL SHAFT.
* ENGINE TYPE: 4-STROKE SINGLE CYLINDER . AIR-COOLED
* BORE STROKE: 68MM X 54MM
* SHAFT LENGTH X DIAMETER 50MM x 20MM
* KEYWAY SIZE: 4.78 x 34mm
* DISPLACEMENT: 196ML
* MOTOR MAXIMUM POWER OUTPUT: 6.5HP/3600RPM THAT REDUCES TO 1800 MAXIMUM RPM WITH THE 2:1 REDUCTION GEARBOX
* MAX .TORQUE: 10.8N.M/2500RPM
* IGNITION SYSTEM: NON-CONTACT TRANSISTORIZED IGNITION (TCI)
* MAX POWER 2.5KW
* START MODE: RECOIL HAND-OPERATED
* FUEL TANK CAPACITY: 3.6L
* FUEL CONSUMPTION: 290G/HP-HOUR (395 G/KWH)
* ENGINE OIL CAPACITY: 0.6L
* NET WEIGHT : 16KG APPROX
* DISTANCE BETWEEN THE 4 X BASE PLATE OF MOTOR BOLT HOLES. Lengthwise: 164mm from centre hole to centre hole ( bolt hole 10mm)
* Widthwise: 77mm from centre hole to centre hole (With an elliptical hole 10mm x 14mm to allow for adjustment


If you experience any issues with products or service, please contact us and we will try our very best to resolve them
Views: 49
Submit


Ad
Ad
Ad

© Kiwi Market